Description:

Kitset to convert the following vehicles to a 6 speed Tremec TR6060 manual transmission.

The following are the Holden V8 VY & VZ cars from 04' & 05' suited to this conversion.

Holden Adventra CX8
Holden Adventra LX8
Holden HSV Avalanche
Holden crewman Cross 8
Coupe 4

Kit consists of the following:

Adapter housing
Billet housing machined from 6061 T6 Aluminium
Made up of three parts.
1 x Centre boss
1 x C5 adapter flange
1 x NV124 adapter flange
16 x M10 countersunk bolts for bolting three parts together, (supplied assembled).

Adapter shaft
1 x Billet adapter shaft made from heat treated & ground 4340 alloy steel.
One end internally splined to suit TR6060 output shaft.
Other end externally splined to suit NV124 Transfer case.
1 x Reluctor wheel, (press fitted to the adapter shaft)

Bolting speed sensor to adapter case
1 x stainless steel speedometer sensor clamp.
1 x M5x12 clamp screw.
1 x M5 spring washer

Bolting adapter housing to the C5 case
7 x M10x40 high tensile bolts
12 x M10 flat washers
5 x M10 Nyloc nuts

Bolting adapter housing to the transfer case
2 x M10x75 high tensile bolts
4 x M10x40 high tensile bolts
11x M10 flat washers
5 x M10 Nyloc nuts

Part no. TR6060 CONV

PLEASE NOTE:
There are further parts required to complete the conversion.
The kitset listed above adapts the TR6060 transmission to the NV124 transfer case.
Other parts are still required, (as listed in the conversion process) as well as fabrication work.