Barracuda Kitset (Fully Welded)
Sold out.
Description:
Complete Barracuda Mk II buggy kitset, includes fully welded chassis. All front suspension, brakes, steering, pedals, shift lever, rear suspension, shocks, seat, seat slides, harness, fuel tank, Nerf bars, battery box, floor pan, bash plates, bulkhead plate, wheels & tyres. All parts welded including chassis (minus motor).
Includes the following parts:
- Complete welded chassis frame (upgrades include extra nose bracing & bracing under engine area).
- Aluminium nose bash plate, floor pan, bulkhead plate, engine bash plate & rear suspension bash plate.
- Front suspension arms, top & bottom.
- Front arm pivot pins & bushes.
- Front suspension chrome moly rod ends (total of 10) with spacers & castor adjuster nuts & lower arm adjuster nuts.
- Front suspension uprights, wheel hubs, disc rotors, calipers, nuts & bolts.
- Front stainless braided brake hoses & fittings.
- Complete pedal box with 3/4" master cylinder for front brakes.
- 1/2 turn billet rack & pinion, tie rods, steering column, column bush, steering wheel, nuts & bolts.
- High back fibreglass rally seat and 3" link & latch 5 point race harness.
- Seat slides with nuts & bolts.
- Side intrusion nerf bars, fully welded with mounting bolts.
- Aluminium 20 litre (5 gallon) fuel tank with racing filler cap, mount rubbers & bolts, with machined flange to accept Suzuki fuel pump (pump not included).
- Thottle pedal housing with pedal, throttle cable & adjuster.
- Gear change lever & push pull cable with M6 rod ends.
- 4 x SHOCK790 coilover shocks with mount bolts & spacers.
- Complete CV2 rear suspension from hub face to hub face, includes the following:
- Centre housing (welded into chassis), centre cartridge with sprocket, floating disc rotor, twin piston caliper, bearings, adjuster plates & CV output hubs, (fully assembled).
- Top & bottom rear suspension arms with pivot pins & bushes.
- Chrome moly rod ends (6) with top & bottom adjuster nuts.
- Suspension uprights (2) with bearings, wheel hubs, wheel studs, wheel nuts, nuts & bolts.
- 2 x CV driveshaft assemblies with 930 Porsche CV joints (4), splined axles (2), heavy duty CV overboots (4) & mounting bolts.
- Cartridge spacers, load washers & mount bolts.
- Chain adjuster turnbuckle with left & right rod ends, spacers, nuts & bolts.
- Rear brake pedal box housing with pedal, 5/8" master cylinder, rear stainless brake hose & fittings.
- Two 12x5" steel front rims.
- Two 12x10.5" steel rear rims.
- Two 25x8x12" Duro Red Eagle tyres
- Two 26x12x12" Maxxis Bighorn tyres
- 4 x Tubeless valves.
- Battery box with alloy lid
NOTE: THIS ITEM IS SPECIAL ORDER ONLY
CONTACT US FOR MORE INFORMATION.
Part no. BCKIT
Other related products
-
$14,350.00
-
$1,900.00
-
$2,195.00
Categories
- Buggy Plans
- CV2 Rear Suspension
- Holden Adventra 6 Speed conversion
- Kitsets
- PIRCV Rear Suspension
- S1 Rear Suspension
- SW & PIR II DAA Front Suspension Upgrade
- The 6x6
- The Barracuda Mk I
- The Barracuda Mk II
- The Barracuda R
- The Fun Kart III
- The Mini Monster Truck
- The Mini Monster Van
- The Piranha II
- The Piranha III
- The Raven
- The Sidewinder Plus
- The Taipan II
- The Trax III
- The Voodoo
- The X2
- The X2R
- Trailer & Machinery